A working rig assembled for repeated heavy labor in corrosive conditions — the kind of outfit that gets worn six days a week, washed when there's water, and repaired the same night it tears. The primary garment is a full-coverage boilersuit in heavyweight faded olive drab, the fabric stiffened from years of oil, industrial sealant, and repeated acid-rain exposure into something approaching light armor. The chest panel has a large rectangular acid-shield patch in charcoal gray, edges sealed with a bead of industrial adhesive that's cracked and re-applied so many times it forms a topographic ridge around the patch's perimeter. Both knees are likewise reinforced — the right with rubberized canvas, the left with a section of industrial conveyor belting cut to fit and secured with heavy rivets. The suit's left sleeve has been cut away at the shoulder and replaced with a chrome-compatible open channel — the wearer has a partial arm augmentation, and the channel is lined with a strip of anti-friction neoprene to prevent the chrome edge from catching on fabric. Beneath the suit, a compression underlayer in gray spandex-blend manages sweat and minor impact. Over the suit in cold conditions, a quilted over-vest in faded black adds thermal mass, its front closure a row of industrial snaps, two of which are mismatched replacements. Boots are heavy-duty, triple-resoled Shelf work boots, the uppers stitched with waxed cord in three different colors where seams have been re-done, the toe box packed with a steel plate cut from a sheet of scrap. A wide back-support belt in reinforced nylon completes the lower kit. The face is partially protected by a half-mask respirator in scuffed gray plastic, worn around the neck when not in use, its filter cartridge visibly old and marked with a hand-scratched date.